VLX 80 Series

VLX 80 Awning Window

Work is performed by our local vetted partner.

Sliding glass doorsSliding glass doors
Single hungSingle hung
Double hungDouble hung
Horizontal rollerHorizontal roller
CasementCasement
Bay & bowBay & bow
Entry doorsEntry doors
Impact garage doorsImpact garage doors
PGTPGT
CGICGI
Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Get your free estimate

VLX 80 Awning Window in Whitney, NV

The VLX 80 Awning Window is a top-hinged aluminum window built to vent a room even when it’s raining outside. The sash swings out and up from the bottom, so the pane itself becomes a small roof over the opening. Homeowners in Whitney, NV reach for this model when they want steady airflow through a kitchen, bathroom or laundry room without watching the weather forecast first. As an authorized installation partner for ViewLux in Whitney, we supply the VLX 80 and install it to AAMA standards, level, plumb and square, with the perimeter sealed so the factory warranty stays intact. Our technicians have up to 25 years of experience setting aluminum systems. Call (844) 722-8594 for a free estimate on your VLX 80 project in Whitney.

professional window installation service in Whitney, NV

Call (844) 722-8594

Product Overview – VLX 80 Awning Window

The design idea behind the VLX 80 is simple: the harder it rains, the more useful a window like this becomes. Because the sash hinges at the top and cranks outward from the bottom, rain runs down the outside face of the glass instead of blowing through the opening. In a desert climate like Whitney’s, that matters less for rain than you’d think and more for dust and wind. On a gusty afternoon, an awning window can stay cracked open for fresh air while a casement or slider would have to be shut. It’s also the practical choice in rooms where a swinging sash would collide with a counter, faucet or cabinet door.

Architecturally, the VLX 80 belongs in narrow horizontal openings. Think above a kitchen sink, over a bathroom vanity, beside a laundry folding counter, or as a clerestory strip in a taller wall. Its 1.97″ profile keeps the frame slim so glass area stays generous. Buyers in Whitney choose this series because it pairs a genuine thermal break with an aluminum body that won’t warp, swell or rot the way wood does in a dry, hot climate. The extrusion carries a 0.079″ wall thickness, which gives the frame real mass without making it feel clunky. The thermal break separates the inner and outer aluminum so heat doesn’t travel straight through the frame, which is the whole reason an aluminum window can perform well in a Whitney summer. Screens come fixed or retractable, so you can choose between a set-and-forget bug barrier or one that rolls out of sight when you want an unobstructed view. Every unit we install in Whitney is measured on site, ordered to fit, and set by technicians who work with aluminum systems regularly.

Explore

Styles & brands we work with

  • Single hung
  • Double hung
  • Horizontal roller
  • Casement
  • Bay & bow
  • Sliding glass doors
  • Entry doors
  • Impact garage doors
  • PGT
  • CGI

Technical Specifications

  • Frame material: extruded aluminum with thermal break
  • Wall thickness: 0.079″
  • Profile width: 1.97″
  • Operation: top-hinged awning, crank-out sash
  • Glass options: Clear, Frosted, Low-E, Tempered, Laminated
  • Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
  • Screen options: Fixed Screen, Retractable Screen
  • Installation standard: AAMA 2400/2410 compliance
  • Perimeter seal: AAMA 812 low-expansion foam on all joints
  • Performance: NFRC-rated thermal performance, airtightness, waterproofing, mist prevention and sound control ratings; impact-resistant laminated glass available; wind-load rated for local climate requirements

Those numbers are the short version. The 1.97″ profile keeps sightlines thin, and the 0.079″ wall thickness is what lets the frame hold its shape in a Whitney summer without flexing at the sill.

Performance Features

Thermal Efficiency
The thermal break divides the inner and outer aluminum so heat can’t run straight through the frame. Combined with Low-E glass, the VLX 80 is rated under NFRC standards for energy performance. In a Whitney summer, that means less heat radiating off the frame into the room and less strain on your cooling system.

Acoustic Performance
Aluminum isn’t naturally quiet, but a thermal break, tight weather seals and the right glass choice change the picture. Laminated glass adds a sound-dampening layer, which is the smarter pick for a Whitney home near a busy road or an active courtyard. The system carries a sound control rating under standard testing.

Airtightness & Weather Seal
Every perimeter joint gets AAMA 812 low-expansion foam sealant, and the sash carries its own weather stripping. That combination produces an airtightness rating that holds up over seasons of opening and closing. Tight seals are also what keep desert dust from working its way in around the frame.

Waterproofing
The VLX 80 carries a waterproofing rating under standard testing, and the top-hinged design does a lot of the work on its own. The sash sheds water rather than catching it. We set each unit with correct sill slope and drainage so water moves out, not back into the wall.

Wind Resistance
The frame is wind-load rated for local climate requirements, which matters in Whitney’s open, gusty neighborhoods. The 0.079″ wall thickness and the rigid aluminum extrusion resist deflection in high wind. Laminated glass options add another layer of impact resistance if that’s a priority for your site.

Security & Hardware
The crank mechanism locks the sash down tight when closed, and the top-hinged geometry makes the opening hard to reach from outside. Hardware is sized to the sash weight so the crank stays smooth. We check operation on every unit before we call the job finished.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Color & Glass Options

Six finishes let you match the VLX 80 to your home instead of working around it. Premium Black and Anodized Silver suit modern Whitney homes with clean lines and dark trim. Pure White reads bright against stucco, which is common here. Bronze and Champagne blend with earth-toned exteriors and desert landscaping. Teak Wood gives you the warmth of a wood-grain look without the upkeep aluminum avoids.

On the glass side, Low-E is the first choice for most Whitney homes because it cuts solar heat gain. Clear keeps things simple and bright. Frosted and Tempered belong in bathrooms and anywhere privacy or safety glass is required. Laminated adds impact resistance and sound control, and it’s available in an impact-resistant build for sites that call for it. Fixed or retractable screens round out the spec.

Installation by Whitney Windows & Doors in Whitney

A window is only as good as the opening it goes into. That’s why every VLX 80 we install in Whitney starts with a pre-install inspection: we check the rough opening, confirm the framing is sound, and verify the unit is square before it ever comes out of the crate. Setting a window level, plumb and square is the foundation for everything else, because a frame that’s racked a fraction out of true won’t seal or operate the way it should.

Once the unit is set, every perimeter joint gets AAMA 812 low-expansion foam sealant, and the whole install follows AAMA 2400/2410 standards for compliance. We finish with a water test and a full cleanup so you see the window working, not just sitting in the wall. Whitney’s dry heat and wind make the seal work especially important. Aluminum expands and contracts with temperature swings, and a sloppy perimeter seal leaves gaps that open up over time. Shortcuts here are also the fastest way to void a manufacturer warranty, which is why the install matters as much as the product. We install warranty-safe so the ViewLux coverage on your unit means something down the road. Your finished window should sit flush, open smoothly, and seal tight. That’s the standard we hold on every Whitney install.

Frequently Asked Questions – VLX 80 Awning Window

Get a Quote – VLX 80 Awning Window in Whitney

Ready to spec a VLX 80 for your Whitney home? Whitney Windows & Doors supplies and installs ViewLux awning windows with free estimates, written line-item quotes, permits pulled and inspections passed, and a workmanship warranty behind every install. Call (844) 722-8594 today to schedule your free on-site measurement and start your project with a team that installs to AAMA standards in Whitney, NV.

Written by the team at Whitney Windows & Doors.

Bring This System Into Your Home

Factory-direct pricing, free in-home measurement, certified installation in Whitney.

(844) 722-8594
Call Now - 24/7 Dispatch
Local Service Coverage

Request a Free Estimate in Whitney

Tell us what you need - Whitney Windows & Doors responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch